Degreaser
Alkaline high-performance degreaser for clean metal surfaces – ideal pre-treatment for electroplating and anodising.
Copper conductive paint (400 ml)
Copper lacquer for metallising non-conductive surfaces – the perfect starting layer for copper plating.
Content: 0.4 Liter (€124.75 / 1 Liter)
Gold plating solution "Midas"
Highly concentrated (8 g/l) for 24K hard gold plating – shiny, scratch-resistant, for bath and pen electroplating.
Content: 0.05 Liter (€1,978.00 / 1 Liter)
Copper conductive paint (200 ml)
Copper lacquer for metallising non-conductive surfaces – the perfect starting layer for copper baths.
Content: 0.2 Liter (€249.50 / 1 Liter)
Yellow chromate conversion coating (1000 ml)
Yellow passivation for zinc: brass-coloured, iridescent – electroless immersion bath, in just a few minutes.
Gleaming agent additive "copper" (50 ml)
Brightening additive for acidic bright copper electrolyte: refreshes the bath and restores shiny copper layers.
Content: 0.05 Liter (€298.00 / 1 Liter)
Acidic bright copper plating solution
Acidic bright copper electrolyte for high-gloss copper plating in baths or pens – cyanide-free.
Content: 0.25 Liter (€59.60 / 1 Liter)
Zinc plating solution
Zinc electrolyte for electroplating: rust protection & spot repair for cars, screws, sheet metal.
Quick bluing solution "Black Magic"
Brushing burnishing for steel, iron and zinc: deep black, spotless – ideal for touch-ups and large areas.
Content: 0.05 Liter (€224.00 / 1 Liter)
Gold tank plating solution "Chamaeleon"
Gold electrolyte for fast, high-gloss 24K gold plating using the bath electroplating process – cyanide-free and simple.
Content: 0.25 Liter (€291.60 / 1 Liter)
Silver plating solution
Silver electrolyte for fast, shiny silver plating in bath and pin electroplating – cyanide-free.
Content: 0.25 Liter (€115.60 / 1 Liter)
Anodizing solution
Anodising electrolyte for baths: anodise aluminium, protect it and colour it if desired.
Titandraht 0.5mm, 1 Meter
Auxiliary wire for fixing workpieces – ideal for electroplating and anodising.
Content: 1 Stück (€3,900.00 / 1000 Stück)
Copper sheet anode
Sacrificial anode for copper electrolytes – dissolves, regenerates the bath and ensures good deposition.
Bluing solution set "Black Devil"
5-component cold burnishing set for dip burnishing steel, iron, cast iron and zinc – economical.
Edelstahl-Brünierung 250 ml
Brush-on blackening agent for stainless steel (V2A/V4A): blackens quickly, highly adhesive and abrasion-resistant – 250 ml covers approx. 1 m².
Content: 0.25 Liter (€99.60 / 1 Liter)
Anodising dye "Black" (10 g)
Anodising dye for colouring anodised aluminium surfaces – highly economical, easy to dispense.
Content: 0.01 Kilogramm (€1,290.00 / 1 Kilogramm)
Galvanic pen "GalvanoBrush"
Pen for pad/pen electroplating with graphite anode – for targeted coatings, including pads.
Carbon / Graphite rod anode (Ø 8 mm)
Inert graphite rod anode for pen/tampon electroplating – does not dissolve, suitable for almost all electrolytes.
Palladium plating solution
Nickel-free, silver-white barrier layer before gold plating – ensures shiny, clean results.
Content: 0.02 Liter (€595.00 / 1 Liter)
Polishing agent "Power Polish" (250 ml)
High-gloss polish: removes black discolouration and gives metals a high-gloss finish after electroplating.
Content: 0.2 Liter (€74.50 / 1 Liter)
Patination Fluid - Copper & Brass Ager
Concentrate for patinating copper, brass and bronze – quickly creates antique effects and protects.
Content: 0.25 Liter (€95.60 / 1 Liter)
Activator for anodization
Activator for anodising: removes oxide layers, prepares aluminium for the bath.
Alkaline copper plating solution
Basic copper electrolyte for copper plating iron, zinc and steel – ideal barrier layer.