Anodizing

Anodising

With our anodising products you are able to anodise small parts such as tools, car or bicycle parts made of aluminium in colour yourself at home. ELectrolytic OXidation of ALuminium creates a protective layer into which colour can be deposited. In this category you will find complete sets or individual accessories for the corresponding process.

Anodizing solution

Quantity: 1000 mL

Description of the article: Tifoo Anodizing solution – the product features at a glance: DIY anodizing of Aluminium Anodising at home Can be used with our anodizing kit For the actual anodizing step We give you all the instructions on "How to anodize aluminum" The Tifoo Anodizing Solution is used for the anodization of aluminium. It is the fluid used for the actual anodization step, which comes after the preparation and cleaning of the aluminum surfaces and before the dyeing of the surfaces with the anodising dyes. By immersing the aluminium object into the anodizing solution and applying the proper voltage the aluminium gets more and more converted into the desired aluminium oxide surface.After this step is finished the object can be put into the anodizing dye. After that, the sealing step finalizes the Anodization process. With our anodizing kits, dyes and supplies you can easily anodize all kinds of aluminum and its alloys by yourself. All the steps are explained in detail in our Guide on "How to Anodize Aluminum".Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€24.90*

Anodising activator - Cleaning and pretreatment of aluminum - Aluminium cleaner

Activator for anodization

Quantity: 1000 mL

Description of the article: Tifoo Activator for anodization – the product features at a glance: DIY anodizing of Aluminium The previous degreasing and cleaning of the aluminium are important steps to undertake before the anodization. In order to achieve perfect dyes or end results, it is essential to clean and degrease the aluminium surface thoroughly - and this is what the Tifoo Anodization activator is for. Simply dip the workpieces into the solution and leave them in this bath for about 5 to 20 minutes - according to the degree of dirt on it.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€19.90*

Anodising dye black - DIY black anodisation - Colour anodizing of aluminum

Anodising dye "Black" (10 g)

Description of the article: Tifoo Anodising dye "Black" (10 g) – the product features at a glance: Dyes aluminium in an intense black You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10-15 g per litre are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "black" allows you to dye aluminum surfaces in different shades of black. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 1.0 to 5 g per litre of dist. water --> light shade 5.0 to 10.0 g per litre of dist. water --> intense shade 10 to 15.0 g per litre of dist. water--> intense black shade Scope of delivery: 10 g of black anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*

metall-politur glanzpolitur metall aluminium kupfer messing hochglanz

Polishing agent "Power Polish" (250 ml)

Description of the article: Tifoo Polishing agent "Power Polish" (250 ml) – the product features at a glance: easy polishing of various metals with Tifoo Power Polish Polish for post treatment after plating Removes black discolourations and makes the object gleam 250 mL highly effective polish Polish for most metals This top product from Tifoo allows you to polish numerous metals like iron, nickel, lead, tin, silver, gold, copper, zinc, aluminium, chrome, bronze, brass, palladium, rhodium or platinum. In order to achieve a perfect finish after the electroplating process, we also recommend our Tifoo Power Polish for making the workpiece shine. It allows also to get easily rid of blackening or other discolouration. The application is very simple: apply the polish with a soft and dry piece of cloth on the metal in question, polish it and let the polish work in for a moment. After removing eventual residues with alcohol, the shining result can already be seen. A very good combination for gilding almost every metal: copper (acidic), nickel (or palladium or rhodium) and finally gold. We recommend nickel-plating before if youre treating copper, silver and non-ferrous heavy metal because after some days or week, the gold can mix with the shades (diffusion). All of the necessary electrolytes can be purchased in our online shop. We also offer a currentless alternative to nickel plating. Our varied range of galvanic products and electrolyte solutions supports you in hobby and job. Please read also our instruction manuals.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.2 Liter (€74.50* / 1 Liter)

€14.90*

Tank polystyrene (17,0 x 12,8 x 10,0 cm)

Description of the article: The medium sized galvanic tanks are especially designed for electrolyte amounts of 1000 to 15000 ml and anodes of 15 x 10 cm. The galvanic tank medium measures a 17,0 x 12,8 x 10,0 cm (l x w x h). Additionally, you will have a fitting lidin order to be able to leave the solutions in the tank to reuse them.

€13.50*

Anodising aluminum kit - DIY anodising of aluminium and aluminum alloys

Anodising Kit starter kit

Device version: without power supply unit

Description of the article: Tifoo Anodising starter kit – the product features at a glance: Anodising Starter Kit for Anodisation of Aluminium Dye aluminum in different colours - 3 different colours included - More in our further product range All supplies and colours included for DIY anodising of alu and its alloys Colour anodisation is THE technique for corrosion protection and dyeing of aluminum Everything you need to anodise aluminium by yourself - even as a beginner. Thanks to the included extensive instruction manual, you'll be able to realise first own anodisation projects. In order to anodise by yourself, you now just need some distilled water (available e.g. at every gas station) and a power supply. The latter can be purchased from us as well, if you don't have any. The variants differ as follows: without power supply: all components as listed above without power supply 3 A power supply: all components listed above and an adjustable power supply (18 V, 3 A) - especially suitable for anodising small components (< 2 dm² surface) 10 A power supply: all components listed above and an adjustable power supply (30 V, 10 A) - best choice for anodising bigger objects

€99.90*

Deanodisation (1000 ml)

Description of the article: The Tifoo Deanodisation removes old or bad anodised layers in a quick and simple way.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€19.90*

eloxal farbe rot anodising dye red colorante anodizzare rojo anodisation rouge anodizado

Anodising dye "Red" (10 g)

Description of the article: Tifoo Anodising dye "Red" (10 g) – the product features at a glance: Dyes aluminium in an intense red You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10 g are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "red" allows you to dye aluminum surfaces in different shades of red. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 0.1 to 1.0 g per litre of dist. water--> light shade 1.0 to 5 g per litre of dist. water --> intense shade over 5.0 g per litre of dist. water --> rich shade Scope of delivery: 10 g of red anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*

Tank polystyrene (7 x 6 x 7 cm)

Description of the article: Tifoo Tank polystyrene (7 x 6 x 7 cm) – the product features at a glance: polystyrene tank for electroplating 7 x 6 x 7 cm 294 ml volume The small galvanic tank is designed exactly for the electrolytes' packaging sizes from 100 to 250 ml and for the anodes of 8 x 5 cm size. Its measurements of 7 x 6 x 7 cm (l x w x h) makes the small galvanic tank perfect for tank plating of jewellery and other small objects. Also when using expensive and highly concentrated precious metal electrolytes, it is sensible to employ small receptacles.

€8.50*

Tank polypropylene (300x200x140 mm)

Description of the article: The big galvanic tanks are especially designed for electrolyte amounts of 5-6 l and anodes of 20 x 17 cm. The galvanic tank medium measures a 300x200x140 mm (l x w x h). Additionally, you will have a fitting lidin order to be able to leave the solutions in the tank to reuse them.

€14.50*

Anodising dye orange - Home anodsing - Anodised aluminum colors

Anodising dye "Orange" (10 g)

Description of the article: Tifoo Anodising dye "Orange" (10 g) – the product features at a glance: Dyes aluminium in an intense orange You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10 g are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "orange" allows you to dye aluminum surfaces in different shades of orange. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 0.1 to 1.0 g per litre of dist. water--> light shade 1.0 to 5 g per litre of dist. water --> intense shade over 5.0 g per litre of dist. water --> rich shade Scope of delivery: 10 g of orange anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*

Aluminum dye yellow - Anodizing dye yellow

Anodising dye "yellow" (10 g)

Description of the article: Tifoo Anodising dye "yellow" (10 g) – the product features at a glance: Dyes aluminium in an intense yellow You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10 g are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "yellow" allows you to dye aluminum surfaces in different shades of yellow. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 0.1 to 1.0 g per litre of dist. water--> light shade 1.0 to 5 g per litre of dist. water --> intense shade over 5.0 g per litre of dist. water --> rich shade Scope of delivery: 10 g of yellow anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*

Anodizing color blue - Blue anodized aluminum

Anodising dye "Blue" (10 g)

Description of the article: Tifoo Anodising dye "Blue" (10 g) – the product features at a glance: Dyes aluminium in an intense blue You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10 g are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "blue" allows you to dye aluminum surfaces in different shades of blue. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 0.1 to 1.0 g per litre of dist. water--> light shade 1.0 to 5 g per litre of dist. water --> intense shade over 5.0 g per litre of dist. water --> rich shade Scope of delivery: 10 g of blue anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*

Laboratory power supply (30 V, 10 A)

Article description: Tifoo laboratory power supply (30 V, 10 A) - the product features at a glance: Output voltage: 0-30 V (infinitely variable) Output current: 0-10 A Stabilized and short-circuit proof Dimensions: 240 mm × 160 mm × 85 mm Incl. power cable

€159.90*

Anodized paint green - Anodising green with anodising dye green from Tifoo anodising company

Anodising dye "Green" (10 g)

Description of the article: Tifoo Anodising dye "Green" (10 g) – the product features at a glance: Dyes aluminium in an intense green You can find more anodising colours, anodising accessories and "DIY anodisation"-kits in our product range The Tifoo anodisation products allow dyeing aluminium in a lot of different colours 10 g are enough for dyeing big aluminium surfaces (depending on the shade's intensity) Easy colour anodisation The finish for a successful anodisation is the final dye. We offer you exclusive anodising dyes of highest quality. The Tifoo Anodising dye "green" allows you to dye aluminum surfaces in different shades of green. Just mix the dye into the desired amount of distilled water (can be purchased at any petrol station). The following indications concerning the concentration can be used: 0.1 to 1.0 g per litre of dist. water--> light shade 1.0 to 5 g per litre of dist. water --> intense shade over 5.0 g per litre of dist. water --> rich shade Scope of delivery: 10 g of green anodising dye

Content: 0.01 Kilogramm (€1,290.00* / 1 Kilogramm)

€12.90*