Description of the article: Tifoo Bronze paint (100 ml) – the product features at a glance: CONTENTS: 100 ml high-quality bronze paint. EFFICIENT: sufficient for approx. 2.5 m² with high coverage at the same time. COLOUR TONE: professional rich pale gold bronze colour. COMPATIBLE: Basis for creative and targeted ageing effects such as blue patina and black patina. NOTE: Product is not suitable for use as gloss spray paint for decoration purposes, e.g. for festivities. The Tifoo bronze paint convinces with its lightfast metallic gloss. This is created by the high proportion of real bronze particles. The quality is permanently maintained by UV and light-resistant pigment in a resistant binder layer. After drying, the paint is waterproof and remains elastic. The paint is mixed ready for use, but it can be diluted as needed (e.g. with spirit or acetone). The paint is suitable not only for painting on canvases, paper, styrofoam, wood and chipboard, etc., but also for decorating, for example, stones or plastic. The paint is applied with an artificial or real hair brush, which can then be cleaned with spirit without leaving any residue. A special feature of bronze paint is that it can be additionally blue-patinated or black-patinated with in-house products. This allows you to specifically create an antique vintage finish on almost all objects to which the bronze paint adheres. This patina effect would take years to occur naturally. Thus, this precious metal paint is suitable for your craft project as well as for professional use. Note: For patination you need the "blue patination" - for darkening you need the "patination" from Tifoo Note: This product is not suitable for use as a gloss spray paint for decoration purposes e.g. for festivities Scope of delivery: 100 ml bronze paint in resealable wide neck screw cap container Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Uranine / Fluorescein disodium salt (100 g) – the product features at a glance: fluorescein / uranine for leakage detection also suitable for fishing fluorescent dye - very economical 100 g of highly pure uranine / fluorescein-disodium salt Fluorescein disodium salt (so-called uranine) is widely known as fluorescent dye. Exposed to natural or UV light, a uranine solution exhibits a distinct green fluorescence – even in tiny concentrations. That's why it is used e.g. by shipwrecked persons to call the attention of search parties. The biological harmlessness of uranine makes it suitable for manifold applications. For example, it is commonly used for the detection and location of leakage, for leak testing of flat roofs or for fancy colour effects in discotheques and nightclubs. When buying uranine, please make sure you handle it safely and read the safety indications on the label and safety data sheet. The fluorescein will be delivered in a recloseable plastic bottle with 100 g. Please consider that uranine is not suitable for food colouring. Scope of delivery: 100 g fluorescein disodium salt / uranine

Description of the article: Tifoo Pen plating system "GalvanoBrush" - Starter kit – the product features at a glance: power supply with 3 amperes, 18 volts + galvanic pen "GalvanoBrush" 1 x copper rod anode + 1 x graphite rod anode + 4 swabs acidic copper electrolyte 250 mL gold electrolyte "Flash" 50 mL The Tifoo brush electroplating kit enables you to quickly start into brush plating. It contains everything needed for gold and copper brush plating. The sequence for non-conductive materials is as follows: first use the silver spray, then plate with bright copper solution and finally brush plate with the gold plating solution. With the included gold brush plating solution "Flash" you can even plate on stainless steel. If you have any questions, we'll be happily at your disposal. Particular advantages: Gold electrolyte "Flash": the only electrolyte that directly gilds stainless steel and chrome Copper electrolyte for quick and gleaming deposition Fitting anodes: Graphite (for Gold electrolyte "Flash") and copper (for copper electrolyte) - Graphite is the universal and best material for gilding (for stainless steel anodes that are often offered in other kits exists the danger that the anode corrodes which pollutes the electrolyte) Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Pen plating system "GalvanoPen" - Basic kit – the product features at a glance: ideal for filigree electroplating all of the utensils for successful pen plating power supply with 3 amperes, 18 volts GalvanoPen "Graphite" + 3 felt points + 2 cables + 1 alligator clip The Tifoo pen plating basic kit. All of the needed chemcials can be purchased from us. The Tifoo pen plating system Basic provides an opportunity for jewellers, horologists as well as for passionate hobbyists to galvanically refine their workpieces in a facile fashion. The GalvanoPen device is suitable for filigree and decorative surface modifications of jewellery or other components. As an example, pieces of jewellery can be easily gold plated – if desired, also in the form of rose, white or green gold. This novel pen plating system facilitates a partial and selective coating of even tiny areas with precious metals. Moreover, the GalvanoPens are highly useful for repair works. The following GalvanoPens are needed for different applications: Graphite: for gilding, silver plating, palladium plating, copper plating, zinc plating Nickel: for chrome plating, nickel plating Scope of delivery: regulated power supply 2 cables 3 felt points crocodile clip

Article description: Tifoo laboratory power supply (30 V, 10 A) - the product features at a glance: Output voltage: 0-30 V (infinitely variable) Output current: 0-10 A Stabilized and short-circuit proof Dimensions: 240 mm × 160 mm × 85 mm Incl. power cable

Description of the article: Tifoo Tank plating system - Deluxe kit – the product features at a glance: adjustable power supply (3 A or 10 A) required - innovative FlexiMove Plating System for free variation 3 x stainless steel threaded rod, 4 alligator clips, 3 x magnetic suspension 3 x gilded fixation plugs, 1 x copper anode 15 x 10 cm 1 x stainless steel anode 15 x 10 cm, 1 x galvanic tanks (2000 mL) 2 x cable 0.5 m (1 red and 1 black) The brand new and completely versatile Electroplating equipment Deluxe from Tifoo for plating small objects. The tank plating equipment deluxe fullfills all the requirements for a modern plating device. Its high flexibility and variability allows to use a high numer of different electrolytes, anodes, power sources and receptacles. Besides, its innovative design avoids any tangling of the cables and allows a free positioning of the anodes and workpieces. The anodes as well as the cathodic workpiece can be moved freely into every direction. It is also easily possible to integrate blender systems, heating possibilities and filtre systems into the equpiment - always according to your needs. Completed with a high amount of useful accessories, the equipment allows you to store the electrolyte after the treatment for later use. This equipment can be used with all of the tank plating electrolytes and package sizes of our product range without any problems. The Tifoo Tank plating equipment deluxe - possibly the most costumer-friendly on the market. Purchase your easy and at the same time professional start in the exciting world of (hobby) electroplating of small objects. You can chose between a 3 A or 10 A power supply. The stronger power supply is especially needed for objects with bigger surfaces and when using electrolytes that need a high current density, like e.g. the copper electrolyte. (5 A pro dm²). The Tifoo zinc electrolyte for example needs a current density of about 2 A / dm² for immersion plating. That means that with a 3 A power supply, you can e.g. galvanize a surface of 1.5 dm² = 100 cm², i.e. for example a metal sheet of 15 x 10 cm. For all bigger parts, it is advisable to work with a 10 A power supply. The electrolytes vary here: for a gold electrolyte bath, 0.3 A pro dm² are enough, whereas chrome needs a current density of 15 A per dm². An overview of each needed current density can be found either in the instruction manuals of the electrolyte in question, or in Tifoo Current density table. For a detailed description of how to use the products, please read the corresponding instruction manual.

Description of the article: Tifoo Clear lacquer for gold leaf and metal leaf (500 ml) – the product features at a glance: Water-based solutions, non-flammable solutions high transparence and resistance against environmental influences - also suited as varnish for acryllic colours Clear lacquer: dries completely within 15 - 20 minutes and gets transparent Ideal for gold leaf, silver leaf and any metal leaf High quality product, water-proof after drying The TIFOO Clear lacquer and protection varnish is an ideal finish for gilding with metal leaf. The lacquer is water-based, which means that it is free from harmful solutions. The lacquer dries fast and highly transparent. Thanks to special additives, the lacquer moistens evenly and doesn't create "puddles" on the metal. Universally applicable also as varnish for acryllic colours and protection varnish for electroplated objects. This allows the lacquer to prevent brass and bronze from tarnishing. This is why the gilding with metal leaf (brass leaf) stays golden permanently and doesn't get dark. The lacquer can also be brushed or sprayed on. Ideal for gold leaf, electroplating or art. Suitable material: stone, wood, paper, tin, clay, plaster, cardboard, metal and many more. Attention: Don't use this clear lacquer with cheap gold leaf We recommend to use the gold leaf adhesive by Tifoo because those of other suppliers might cause discolourations Protect from frost! Scope of delivery: 500 mL of clear lacquer, water-based protection varnish

Article description:Tifoo laboratory power supply (18 V, 3 A) - the product features at a glance: Output voltage 0-18 V DC adjustable, max. power 3 A, power consumption max 130 watts Stability < 0.01 % + 1 mV Residual ripple < 1 mV Operating environment: 0-40 °C at, connection sockets via banana plug connection (4 mm safety laboratory sockets) Voltage adition possible by connecting several power supply units in series, current adition possible by connecting several power supply units in paralelDigital display for voltage and current, short-circuit proof and current limiting Input voltage 230 V~ 50 Hz L x W x H: 150 x 95 x 205 mm Weight: 3.2 kg Technical data: Operating voltage: 230 V~ Output voltage: 0...18 V- Current limitation: 0...3 A Residual ripple: < 1 mV Temperature-controlled fan Short-circuit proof Operating temperature: 0...40 °C Weight: 3.2 kg Dimensions (WxHxD): 95x148x235 mm Scope of delivery Power supply unit Instruction manual Power cable Connection cable with crocodile clips

Description of the article: Tifoo Gold leaf adhesive and clear lacquer for gold leaf and metal leaf (2 x 500 ml) – the product features at a glance: Water-based solutions, non-flammable solutions Gold leaf adhesive: dries within 10 - 15 minutes with a high sticking capacity Clear lacquer: dries completely within 15 - 20 minutes and gets transparent- high transparence and resistance against environmental influences - also suited as varnish for acryllic colours Ideal for gold leaf, silver leaf and any metal leaf High quality products, water-proof after drying The TIFOO Gold leaf adhesive is the perfect primer for gilding with gold leaf. It dries on numerous materials like canvas, wood, stone and so on. After drying you have three days and more to apply the gold leaf. It is suited for any kind of metal leaf. Apply a thin layer of the gilding primer on the surface and put the metal leaf on the sticky surface after the drying time of 10 to 15 minutes. The metal leaf sticks immediately and can be smoothed out with a soft brush. Done! So you can achieve impressive gilding of frames, statues and furniture fittings within a very short time. Ideal for all objects too big for electroplating. The TIFOO Clear lacquer and protection varnish is an ideal finish for gilding with metal leaf. The lacquer is water-based, which means that it is free from harmful solutions. The lacquer dries fast and highly transparent. Thanks to special additives, the lacquer moistens evenly and doesn't create "puddles" on the metal. Universally applicable also as varnish for acryllic colours and protection varnish for electroplated objects. This allows the lacquer to prevent brass and bronze from tarnishing. This is why the gilding with metal leaf (brass leaf) stays golden permanently and doesn't get dark. The lacquer can also be brushed or sprayed on. Ideal for gold leaf, electroplating or art. Suitable material: stone, wood, paper, tin, clay, plaster, cardboard, metal and many more. Protect from frost! Scope of delivery: 500 mL of gold leaf adhesive 500 mL of clear lacquer, water-based protection varnish

Description of the article: Goldanalytix Silver testing kit – the product features at a glance: silver testing agents for private users unique formula allows private use easy and fast silver test The novel formulas of our silver testing agents are free of the conventionally used carcinogenic chromates which are subject to hazardous materials regulations. Therefore, our silver test system is also permitted for private users. An unambiguous colour change (distinct yellow colouring) quickly indicates the authenticity of the silver sample. Besides, the test can be applied to differentiate between fine silver and Sterling silver (925 silver) and lower-grade silver-copper alloys. Simply apply testing agents 1 and 2 either on the abraded silver material on the touchstone or even directly on the surface of the test object and observe, whether a colour change is taking place or not. That's it for the silver proof! Scope of delivery: 5 mL silver testing agent 1 5 mL silver testing agent 2 5 mL care agent for the touchstone touchstone user manual Instruction manual: Silver testing kit Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Fibre glass eraser / fibre glass pen – the product features at a glance: Fibre glass eraser with included fibre glass inserts Easy to use: fibre glass brushes can be exchanged easily Can be used on paper, plastic, ceramics, metal, stone and many more Remove oxide layers or patinas from electric connections, prepare soldering joints, remove solder resist on circuit boards For modelling, electronics, service for watches and clocks, jewellery creation, nail art Prepare surfaces fast and thoroughly with the fibre glass eraser from TifooThe fibre glass eraser from Tifoo is versatile in its use. This tool allows you for example to remove rust and patinas very quickly - and to make every metal shine. Additionally, the fibre glass eraser can be used for many purposes, e.g. restoring of the electric conductivity of contact units (oxidized connecting sockets), the preparation of soldering joints and polishing and grinding spots that are normally hard to reach. The fibre glass reaser is easy to use and the brushes can be exchanged and adjusted quickly. The fibre glass brush is also suited for erasing paper and (plastic) films. Scope of delivery: 1x fibre glass eraser (120 x 10 mm) 1x fibre glass brush 4 mm diameter (25 mm fibre length)

Description of the article: Tifoo Glow in the dark powder turquoise – the product features at a glance: very high luminescence - based on strontium aluminate glows longer and brighter than common zinc sulphide water-proof, mixable with binding agents soluble in water rechargeable without almost any limitations and extremely UV-resistant safe manipulation - not radioactive The TIFOO glow in the dark powder can be purchased in different colours, e.g. green, turquoise and blue. The turquoise luminescence powder shows the highest luminescence. Its use is extraordinary easy: just illuminate shortly and directly with sunlight or a strong lamp and after a few minutes, the powder is charged. It glows many hours in the dark. The glowing pigment can eithter be used directly as decoration article or it can be mixed e. g. into colours. We recommend especially the combination with the water-based Tifoo Clear lacquer. Applications: glowing stars in the children's room, luminescing house numbers, escape way indications, nail varnish, disco, glow in the dark parties, glow paint and more Scope of delivery: 50 g of luminescence colour turquoise

Description of the article: Tifoo Flash Rust Remover – the product features at a glance: removes rust in no time at all - the best solution for removing rust of numerous surfaces easy application as immersion bath ready for use solution Tifoo Flash Rust Remover - the highly efficient rust remover. With the Tifoo Rust Remover, flash rust will be a thing of the past. Please note: unlike our Tifoo Rust converter, the rust is not converted, but completely removed. The ideal product for rust removal in exterior and interior spaces! Easy to use, practical and highly efficient. First loosens the flash rust and removes corrosion without any problems. Please only use as immersion bath - the rust removal already works after a short exposure time in the bath. Suitable for every kind of iron objects, steel of every category and castings. Whether it's rims, brakes, pump components or garden ornaments - the Tifoo Rust Remover is perfect for you car, bike, boat and tools. Please check out our entire offer in the domain of metal treatment like our rust converter or our quick bluing. You will find instruction for right application of the Tifoo Flash Rust Remover on our homepage.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo E-Zinc - Full set – the product features at a glance: power supply with 3 amperes and 18 volts swab pen (for different electrodes) + zinc electrode 1x microfibre swab, 2 cables and alligator clip Zinc electrolyte 1000 ml + Tifoo Power Polish 200 ml The E-Zink full set from Tifoo allows you to easily galvanize vehicle parts and many other things. Galvanizing is the perfect corrosion protection for further painting and is the perfect rust protection for iron metals. The included power supply allows you to adjust and regulate the needed current intensity for achieving perfect results, which can't be achieved with a car battery. The Tifoo E-Zinc works on sheet metal, bodywork tin and on already galvanized metal sheets. Galvanizing with E-Zinc is the perfect etching primer for every varnish, offers rust protection and can easily be painted on without further preparation. E-Zinc is the best possibility for DIY galvanizing of bodywork metal sheets. With the included Tifoo PowerPolish, you'll be able to make the zinc very bright. Besides, the E-Zinc kit from Tifoo allows you to galvanize for example: motorbike parts vintage car parts screws Scope of delivery: 1x power supply (3 A - 18 V) 1x swab pen (with exchangeable electrodes, e.g. for chrome-plating) 1x zinc plating 1x microfibre swab 1x zinc electrolyte (1000 ml) 1x Tifoo PowerPolish (200 ml)Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Glass brush 10 pcs replacment brushes for fibre glass eraser fibre glass pen – the product features at a glance: 10 glass brushes for fibre glass eraser (4 mm brush diameter) Refill pack for fibre glass eraser Can be used on paper, plastic, ceramics, metal, stone and many more Remove oxide layers or patinas from electric connections, prepare soldering joints, remove solder resist on circuit boards For modelling, electronics, service for watches and clocks, jewellery creation, nail art Prepare surfaces fast and thoroughly with the fibre glass eraser from Tifoo The fibre glass eraser from Tifoo is versatile in its use. This tool allows you for example to remove rust and patinas very quickly - and to make every metal shine. Additionally, the fibre glass eraser can be used for many purposes, e.g. restoring of the electric conductivity of contact units (oxidized connecting sockets), the preparation of soldering joints and polishing and grinding spots that are normally hard to reach. The fibre glass reaser is easy to use and the brushes can be exchanged and adjusted quickly. The fibre glass brush is also suited for erasing paper and (plastic) films. Scope of delivery: 10x fibre glass brush with diameter or 4 mm (25 mm fibre length)

Description of the article: Tifoo Anodising Kit "Deluxe" – the product features at a glance: Tifoo anodising deluxe kit for anodisation of aluminium with different anodising dyes high quality results Everything you need to anodise aluminium by yourself - even as a beginner. Thanks to the included extensive instruction manual, you'll be able to realise first own anodisation projects. The deluxe accessories mainly comprise the innovative Tifoo magnetic support system for orientations and order of the anodes and cathodes. In order to anodise by yourself, you now just need some distilled water (available e.g. at every gas station) and a power supply. The latter can be purchased from us as well, if you don't have any.- max. surface to be coated with 3 A power supply unit: 2 dm² - max. surface to be coated with 10 A power supply unit: 6.7 dm² The variants differ as follows: without power supply: all components as listed above without power supply 3 A power supply: all components listed above and an adjustable power supply (18 V, 3 A) - especially suitable for anodising small components (< 3 dm² surface) 10 A power supply: all components listed above and an adjustable power supply (30 V, 10 A) - best choice for anodising bigger objects

Description of the article: Tifoo Gold leaf adhesive for gold leaf and metal leaf (500 ml) – the product features at a glance: Water-based solution, non-flammable solution Gold leaf adhesive: dries within 10 - 15 minutes high sticking capacity up to 3 days time to start gilding High quality product The TIFOO Gold leaf adhesive is the perfect primer for gilding with gold leaf. It dries on numerous materials like canvas, wood, stone and so on. After drying you have three days and more to apply the gold leaf. It is suited for any kind of metal leaf. Apply a thin layer of the gilding primer on the surface and put the metal leaf on the sticky surface after the drying time of 10 to 15 minutes. The metal leaf sticks immediately and can be smoothed out with a soft brush. Done! So you can achieve impressive gilding of frames, statues and furniture fittings within a very short time. Ideal for all objects too big for electroplating. Protect from frost! Scope of delivery: 500 mL of gold leaf adhesive

Description of the article: Tifoo Glow in the dark powder green – the product features at a glance: very high luminescence - based on strontium aluminate glows longer and brighter than common zinc sulphide water-proof, mixable with binding agents soluble in water rechargeable without almost any limitations and extremely UV-resistant safe manipulation - not radioactive The TIFOO glow in the dark powder can be purchased in different colours, e.g. green, turquoise and blue. The turquoise luminescence powder shows the highest luminescence. Its use is extraordinary easy: just illuminate shortly and directly with sunlight or a strong lamp and after a few minutes, the powder is charged. It glows many hours in the dark. The glowing pigment can eithter be used directly as decoration article or it can be mixed e. g. into colours. We recommend especially the combination with the water-based Tifoo Clear lacquer. Applications: glowing stars in the children's room, luminescing house numbers, escape way indications, nail varnish, disco, glow in the dark parties, glow paint and more Scope of delivery: 50 g of luminescence colour green

Description of the article: Tifoo Glow in the dark powder blue – the product features at a glance: very high luminescence - based on strontium aluminate glows longer and brighter than common zinc sulphide water-proof, mixable with binding agents soluble in water rechargeable without almost any limitations and extremely UV-resistant safe manipulation - not radioactive The TIFOO glow in the dark powder can be purchased in different colours, e.g. blue, turquoise and blue. The turquoise luminescence powder shows the highest luminescence. Its use is extraordinary easy: just illuminate shortly and directly with sunlight or a strong lamp and after a few minutes, the powder is charged. It glows many hours in the dark. The glowing pigment can eithter be used directly as decoration article or it can be mixed e. g. into colours. We recommend especially the combination with the water-based Tifoo Clear lacquer. Applications: glowing stars in the children's room, luminescing house numbers, escape way indications, nail varnish, disco, glow in the dark parties, glow paint and more Scope of delivery: 50 g of luminescence colour blue

IMPORTANT: Until further notice, this product can only be ordered via our contact form. If you would like to add nickel electrolyte to an order, please write this in the order note or contact us after placing your order.  Due to the Hazardous Substances Ordinance, for every order this article may only be supplied to commercial customers and with a declaration of end use. Therefore, please send us a copy of your trade licence and the completed end-use declaration to our e-mail address. Article description:  Tifoo nickel electrolyte (1000 ml) - the product features at a glance:  Nickel electrolyte for nickel-plating objects of all kinds yourself  shiny nickel coating possible  High corrosion resistance  Can be used as a primer for further coating  1000 mL Tifoo nickel electrolyte  Tifoo nickel electrolyte for galvanic nickel plating Nickel plating is one of the most important processes in industry and science. Galvanic nickel plating enables durable and wear-resistant coating of metallic or conductive surfaces. Nickel coatings are also characterised by their resistance to corrosion and good solderability. With the Tifoo nickel electrolyte, you can produce electroplated nickel coatings yourself. The advantages of electroplating nickel with Tifoo nickel electrolyte at a glance:  Shiny nickel look  Ferromagnetic layer (in contrast to electroless nickel !!!)  Good solderability  Nickel-plated objects are more resistant to wear  Excellent deposition properties of the nickel electrolyte  Ideal barrier layer for subsequent electroplating (prevents diffusion and colour mixing, e.g. from copper to gold)  Caution: Nickel is allergenic, therefore avoid skin contact at all costs. Do not inhale aerosols and resulting vapours under any circumstances. IMPORTANT: For deliveries of 4 litres or more, hazardous goods must be shipped. This is currently only possible within Germany (the shipping costs for this are available on request). Delivery restrictions: Please note that in accordance with the Chemicals Prohibition Ordinance (ChemVerbotsV), we only supply this article to resellers, professional users and public research, testing and teaching institutions due to its classification under chemical law. The authorised person must be at least 18 years old. Unfortunately, it is not possible to supply to private individuals. After ordering this article, you confirm by submitting an end-use certificate that you will only use or resell the purchased product in a permitted manner and that you fulfil the legal requirements for this. You can download the form here: End-use certificate - form Important information on handling chemicals: Please refer to the safety data sheet, which you can obtain from us by e-mail, fax or post, for information on the hazards associated with use, the necessary precautions for intended use and in the event of accidental spillage or release, as well as proper disposal. Shipping instructions: As this article is classified as hazardous goods according to REACH / GHS, special regulations apply for international transport by shipping companies. For further information, please refer to our shipping costs table.

Artikelbeschreibung: Goldanalytix Silberprüfmischung 2 - Nachfüllflasche – die Produkteigenschaften auf einen Blick: "Prüfmischung 2" Nachfüllflasche 5 mL Setzt "Prüfmischung 1" des Goldanalytik Prüfsäureset "Silber" voraus Silbertestmischungen für Privat-Anwender einzigartige Rezeptur ermöglicht auch Privatpersonen die Anwendung einfacher und schneller Silbertest Einzelkomponente "Prüfmischung 2" für Goldanalytix Prüfsäureset "Silber". Aufgrund der chemischen Eigenschaften des Zwei Komponenten Systems unseres chromfreien Silbertests, verbraucht man häufig mehr Prüfmischung 2 als erwartet. Haben Sie die "Prüfmischung 2" aufgebraucht und noch einen Rest der "Prüfmischung 1", dann bestellen Sie hier die Nachfüllflasche für "Silber Prüfmischung 2". Hinweis: Um Silber zu testen benötigen Sie Prüfischung 1. Es handelt sich um eine Nachfüllflasche für den zwei Komponenten Silbertest von Goldanalytix "Prüfsäureset Silber" Lieferumfang: 5 ml "Prüfmischung 2" Bedienungsanleitung: Silberprüfmischung 2 - Nachfüllflasche Versandhinweise: Da dieser Artikel nach REACH / GHS als Gefahrgut eingestuft wird, gelten bei internationalem Transport bei Versandunternehmen Sondervorschriften. Weitere Infos entnehmen Sie bitte unserer Versandkostentabelle.