• Customer support (DE + EN)
  • Free delivery from 150 € (DE)
  • Secure payment

Electroplating

With our practical electroplating sets and electrolytes, you can gold- or silver-plate your jewellery at home with metals such as platinum, gold, silver, copper, zinc, etc. by means of pen, bath or brush electroplating. In this category you will receive anodes, electrolytes and complete sets, which you need for the safe electroplating process. If you have any questions, please have a look at our electroplating guide and related application instructions before ordering.

Filter
Gold plating solution "Midas"
Description of the article: Tifoo Gold plating solution "Midas" – the product features at a glance: 50 ml of gold electrolyte - galvanic gilding 8 g of gold / litre for 24 carat gilding ideal for immersion plating - applicable with graphite anode works on many metals hard additives for scratch-resistant gold layer The ideal gold electrolyte for brilliant gold layers on various objects. Highly concentrated gold plating solution (8 g/l gold) with a proper content of the hardener cobalt. The gold plating solution Midas is the ideal choice for (hard-)gilding of objects and materials of all types. The plating solution is ideally suited to perform brush plating. Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.05 Liter (€1,198.00* / 1 Liter)

€59.90*
Degreaser
Quantity: 1000 mL
Description of the article: Tifoo Degreaser – the product features at a glance: 1000 ml of degreaser for different applications - electroplating, car, bike etc. Highly degreasing alkaline cleaner Highly suited for preparative work in electroplating and anodizing Used at room temperature Tifoo Degreaser - this degreasing product serves as a universal weapon against grease on metal and metal surfaces. For impressive and brilliant surface refinement, it is absolutely necessary to remove residues, grease and oxyde layer from the surface. Without degreasing, sticky grease residues or fingerprints can quickly cause unwanted results. Thanks to the new degreasing formula of this degreasing product from Tifoo, you will be able to quickly and easily remove greasy impurities like grease, oils or silicone residues. Dipping the workpiece shortly in the degreasing product is the perfect preparation for succeding plating. After degreasing, you can successfully galvanize or plate by yourself. The product can be used several times. Please read the instructions and safety indications thoroughly before using the product for the first time. We'll gladly be at your disposal if you have any questions about the degreaser. The Tifoo Degreaser - perfectly suited for preparing galvanic work and many other applications.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€19.90*
Copper conductive paint (400 ml)
Description of the article: Tifoo Copper conductive paint (400 ml) – the product features at a glance: 400 ml of conductive copper paint for electroplating for airbrush and brush makes non-conductive material conductive plating plants and natural objects easy and filigree application This galvanic conductive paint on copper base from Tifoo allows you to plate works of art and gifts made of glass, pottery, plastic and a lot of other material with a bright layer of metal in a short time. Just apply a thin layer of the conductive paint with a brush on the cleaned surface. The copper conductive paste dries until rub-proff in 10 to 15 minutes and therefore allows a quick treatment of the workpieces. The complete drying for perfect resistance on stressed surfaces takes about 12 to 36 hours at room temperature. The varnish can be diluted with butyl acetate. In the next step, the object is connected to a wire and copper-plated in the acidic copper electrolyte from Tifoo. A resistant copper layer will then be deposited. The last step can be used for nickel-plating, silver-plating or even gilding! Thanks to its low price and the high electrical and thermical conductiveness, the conductive copper varnish is the perfect alternative to the conductive silver varnish. Please keep in mind that the first step has to consist in copper-plating in the acidic copper electrolyte because the conductive varnish won't be activated before. After copper-plating, the metal layer will be wear-resistant. Suitable material: synthetic material, glass, pottery, plants, wood and a lot of other non-conductive material Drying time: 5-15 minutes (rub-proof), 1-3 days (complete for maximal requirements) 20 mL are enough for a surface of up to one square metre - very efficient!Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.4 Liter (€124.75* / 1 Liter)

€49.90*
Copper sheet anode
Dimensions: 8 x 5 cm
Description of the article: Tifoo Copper sheet anode – the product features at a glance: available sizes: 80 x 50 x 0.6 mm / 150 x 100 x 0.6 mm / 200 x 170 x 0.6 mm ideal for copper-plating perfectly compatible with the small Tifoo "Galvanic tank" also available: graphite, zinc and nickel anodes The copper anode is excellent for working with copper electrolytes. It serves as a sacrificial anode in the acidic copper electrolyte, that means that the copper dissolves and regenerates the electrolyte. This guarantees a constantly good deposition. On request, we offer further electrode sheets. Dont hesitate in contacting us!

€6.50*
Acidic bright copper plating solution
Quantity: 250 mL
Description of the article: Tifoo Acidic bright copper plating solution – the product features at a glance: 250 ml of acidic copper electrolyte with brighteners ideal for tank- and pen plating easy copper-plating by yourself easy application and cyanide-free Tifoo Bright copper electrolyte (acidic) for copper-plating - bright galvanic copper-plating With the bright copper electrolyte (acidic) from Tifoo, you will achieve a very bright copper layer on metal or conducitve surfaces. Please keep in mind that for all the material susceptible to acids (like e.g. iron, steels, zinc or other base metals), it is better to use the Tifoo Copper electrolyte "alkaline"! Copper-plating iron or steel workpieces protects them from rust and gives them an aesthetic surface because of the red gleam of this metal. Thanks to its good solderability, the galvanic copper-plating is ideal for the fabrication of printed circuit boards and circuit boards. You just have to use the copper electrolyte together with a graphite or copper anode and you already can copper-plate a component yourself. The acidic copper electrolyte is especially used for creating thick copper layers in order to use them as a basis for further surface refining. The gleaming effect is only achieved by using an immersion bath; if you use pen plating, the result will be matt. Application and use: For being able to copper-plate zinc or other base-metals, please use the alkaline copper electrolyte. The acidic bright copper electrolyte is compatible with our complete galvanic kit. Please read also our instruction manual and security notes attentively before using the product (see links and downloads below). The brigth copper electrolyte is sent in a handy and reclosable 1 litre bottle which follows the UN security norms. On request, we will send you bigger packages and amounts of the product. We recommend the following combination of copper-plating and following galvanic treatments: 1. bright copper electrolyte (acidic) 2. nickel electrolyte 3. gilding or silver-plating recommended voltage for the bright copper electrolyte for tank plating: 2 – 3 volts pen plating (wont create gleaming layers): 3 – 6 volts Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.25 Liter (€59.60* / 1 Liter)

€14.90*
Copper conductive paint (200 ml)
Description of the article: Tifoo Copper conductive paint (200 ml) – the product features at a glance: 200 ml of conductive copper paint for electroplating for airbrush and brush makes non-conductive material conductive plating plants and natural objects easy and filigree application This galvanic conductive paint on copper base from Tifoo allows you to plate works of art and gifts made of glass, pottery, plastic and a lot of other material with a bright layer of metal in a short time. Just apply a thin layer of the conductive paint with a brush on the cleaned surface. The copper conductive paste dries until rub-proff in 10 to 15 minutes and therefore allows a quick treatment of the workpieces. The complete drying for perfect resistance on stressed surfaces takes about 12 to 36 hours at room temperature. The varnish can be diluted with butyl acetate. In the next step, the object is connected to a wire and copper-plated in the acidic copper electrolyte from Tifoo. A resistant copper layer will then be deposited. The last step can be used for nickel-plating, silver-plating or even gilding! Thanks to its low price and the high electrical and thermical conductiveness, the conductive copper varnish is the perfect alternative to the conductive silver varnish. Please keep in mind that the first step has to consist in copper-plating in the acidic copper electrolyte because the conductive varnish won't be activated before. After copper-plating, the metal layer will be wear-resistant. Suitable material: synthetic material, glass, pottery, plants, wood and a lot of other non-conductive material Drying time: 5-15 minutes (rub-proof), 1-3 days (complete for maximal requirements) 20 mL are enough for a surface of up to one square metre - very efficient!Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.2 Liter (€249.50* / 1 Liter)

€49.90*
Gold tank plating solution "Chamaeleon"
Quantity: 250 mL
Description of the article: Tifoo Gold tank plating solution "Chamaeleon" – the product features at a glance: 100 ml of gold electrolyte - galvanic gilding 1 g of gold / litre for 24 carats gilding ideal for tank plating (not for pen plating); applicable with stainless steel anode works on a lot of metals cyanide-free and easy to use This gold electrolyte from Tifoo allows you to gild and to create gold layers on numerous objects by yourself. Please keep in mind that this electrolyte has especially been optimized for tank- and immersion plating. It has been given the name "Chamaeleon" because this electrolyte is perfectly compatible with our colour additives and allows you to achieve various gold colourations and shades. This cyanide free gold electrolyte deposits bright layers made of 24 carat real gold, normally without the need of polishing afterwards. Galvanic gilding is the ideal finish for every object that is meant to look especially noble. So you can gild e.g. watches, car components, used jewellery or electronic components without problems by yourself and save a lot of money. A very good combination for gilding of almost any metal is: copper (acidic), nickel (alternatively palladium or rhodium) and finally gold. Nickel-plating before gilding is recommended for copper, silver and non-ferrous heavy metal, for it causes a mixing of the shades with the gold after some days or weeks (diffusion), when not made. We offer the needed nickel also as an especially customer-friendly currentless variation. If you need more information or tips for gilding certain objects. we'll always be gladly at your disposal. Recommended voltage for using the Tifoo Gold electrolyte Chamaeleon: Tank plating: 3-4 volts Pen plating: NOT suitable (please use the electrolytes "FLASH" and "MIDAS" in our offer!)

Content: 0.25 Liter (€199.60* / 1 Liter)

€49.90*
Gleaming agent additive "copper" (50 ml)
Description of the article: Tifoo Gleaming agent additive "copper" (50 ml) – the product features at a glance: Gleaming agent for copper plating solution "bright copper electrolyte (acidic)" easy copper plating by yourself with an intense gleam suited for pen- and tank plating Gleaming agent additive for the Tifoo Bright copper plating solution (acidic) - copper-plate with a shiny gleam The gleaming agent additive refreshes used copper plating solution. You just have to add 4 ml of the gleaming additive to 1 litre of used bright copper electrolyte (acidic) and you can create gleaming copper layers again.

Content: 0.05 Liter (€298.00* / 1 Liter)

€14.90*
Silver plating solution
Quantity: 250 mL
Description of the article: Tifoo Silver plating solution – the product features at a glance: 30 g silver per litre - highly concentrated for quick silver-plating Cyanide-free and safe handling - also ideal for hobby-platers Suited for tank- and pen plating Creates thick silver layers very quickly Creates white silver layers that can gleam after polishing The silver electrolyte from Tifoo is perfect for tank- and pen plating. This cyanide-free silver electrolyte can be silver-plated by yourself without any problems. Unlike the common industrial highly toxic silver electrolytes, the handling of this cyaninde-free silver electrolyte is safe. It deposits resistant and aesthetic layers made of fine silver. Thin layers will be bright when deposited, thicker layers are white and can be polished with Tifoo Power Polish until they gleam. This electrolyte is ideal for silver-plating jewellery, for restoring silver cuttlery and for silver-plating of numerous other objects. Thanks to its high silver content of 30 g per litre, this electrolyte deposits silver very fast - that is a big advantage for pen plating, as it reduces the working time. Non-precious metals like zinc or iron should be nickel-plated or copper-plated before silver-plating. Please keep in mind that shiny silver layers can only be created with a silver anode. These anodes can also be found in our product range.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.25 Liter (€111.60* / 1 Liter)

Variants from €12.90*
€27.90*
Zinc plating solution
Description of the article: Tifoo Zinc plating solution – the product features at a glance: 1000 ml of zinc electrolyte ideal for tank- and pen plating perfectly suited for corrosion- and rust protection for application on iron easy to use and free from cyanide The allrounder for protecting iron and steel from corrosion. For vehicles as well as for outdoor applications in your house and garden: The galvanic zinc plating with the Tifoo Zinc electrolyte allows a permanent protection from rust holes, rusty spots and bodywork destruction, e.g. for vintage cars (vintage car restoring). If you have had enough of the paint peeling of because of pitting corrosion, you'll now have the solution to your problem: The galvanic zinc layer protects workpieces made of iron and steel efficiently from rust and gives them a visually appealing surface thanks to its bright colour. When realized with pen plating, this method is also called e-zink and has the advantage that the objects to be plated don't even have to be removed. The Tifoo Zinc electrolyte is perfectly suited for tank- as well as for pen plating. With the weakly acidic, cyanide-free zinc electrolyte, you'll be able to easily galvanize by yourself! recommended current density: 2.5 amperes / dm² (tank plating) needed voltage: about 1-3 volts for tank plating, 1-5 Volt for pen plating Just use our zinc electrolyte with a zinc anode and you can already galvanize by yourself without any problems. Our zinc electrolyte allows you to: repair rust holes on your car by yourself galvanize sheet metals restore vintage cars galvanize screws restore rusted spots and protect them permanently (Spot-Repair) restore modelling components and protect them from corrosion partially repairing rusty spots on railings, stairs and other components (without the need of removing components) Please read our product instructions for selfmade galvanizing and follow their indications. You'll find suitable electroplating equipments and corresponding accessories in our Tifoo Online offer.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€34.90*
Palladium plating solution
Quantity: 20 mL
Description of the article: Tifoo Palladium plating solution – the product features at a glance: 20 ml of palladium plating solution 1 g of palladium / litre Ideal for tank or pen plating Serves as a barrier layer before gilding to avoid alloyings Easy in use and free from cyanide Tifoo Palladium electrolyte - the non-allergenic alternative to nickel electrolyte. Until today, palladium-plating is a quite rarely used electroplating method. In its function as substitution for galvanic nickel-plating, it can offer some advantages (despite the higher price). So, what are its advantages? Normally, a nickel electrolyte is used to create a barrier layer made of nickel between copper and gold to prevent the two metals from mixing together. The advantages are the following: Palladium is more noble than nickel, that means that there is no corrosion on the surface and the palladium doesn't need to be gilded nor activated like nickel. The deposition speed and the effectiveness are excellent, i.e. there is no unwanted gas formation. This electrolyte deposits silver white, very bright palladium and can be used as a bright "finish". When gilding on it with Tifoo Gold electrolyte and pen plating, you will achieve a perfect result. Unlike the nickel electrolyte, palladium isn't cancerogenic and because of that authorised for private costumers! A very good combination for gilding almost any metal is: copper (acidic), palladium and finally gold.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.02 Liter (€545.00* / 1 Liter)

€10.90*
Carbon / Graphite rod anode (Ø 8 mm)
Description of the article: Tifoo Carbon / Graphite rod anode (Ø 8 mm) – the product features at a glance: carbon rod anode of 99% graphite length 10 cm, Ø 8 mm suitable for Tifoo pen / brush plating (GalvanoBrush) The graphite rod anode (diameter: 8 mm, length: 10 cm) is ideally compatible with our Tifoo brush plating system "GalvanoBrush". You can easily repace the anode of the pen, when it is e.g. worn out or unintentionally broken. Graphite is inert, i.e. it is not dissolved and doesn't cause any disturbing deposition of foreign metal. Graphite can practically be used with all plating solutions.

€9.90*
Tank polystyrene (17,0 x 12,8 x 10,0 cm)
Description of the article: The medium sized galvanic tanks are especially designed for electrolyte amounts of 1000 to 15000 ml and anodes of 15 x 10 cm. The galvanic tank medium measures a 17,0 x 12,8 x 10,0 cm (l x w x h). Additionally, you will have a fitting lidin order to be able to leave the solutions in the tank to reuse them.

€13.50*
Pen plating system "GalvanoPen"
Type: Graphite
Description of the article: Tifoo Pen plating system "GalvanoPen" – the product features at a glance: GalvanoPen for filigree pen plating 3 felt points 2 cables + alligator clip silver plating and gilding ideal for Tifoo electroplating equipment The Tifoo GalvanoPens allow especially jewellers, horologists, jewellery designers and hobby-electroplaters to easily refine jewellery by electroplating. The GalvanoPens allow you to realize exciting, decorative and filigree electroplating treatments on jewellery and other small pieces. It is therefore possible to gild jewellery by yourself. With this pen plating system, it is possible to obtain partial and selective precious metal layers even on very small surfaces. In artist studios, in the jewellery industry or at the jeweller's: the Tifoo GalvanoPens with their fine fibre-pen swabs allow you multifaceted colour shades and impressive and astonishing results. The GalvanoPens are also perfectly suited for repairing- and restoring works. The following GalvanoPens are needed for different applications: Graphite: for gilding, silver plating, palladium plating, copper plating, zinc plating Nickel: for chrome plating, nickel plating

€24.90*
Galvanic pen "GalvanoBrush"
Description of the article: Tifoo Galvanic pen "GalvanoBrush" – the product features at a glance: galvanic aluminium pen "GalvanoBrush" for different electrodes graphite rod anode 4 x absorbent swabs The elegant solution for DIY plating via pen plating - the Tifoo manual plating pen. The galvanic plating of metal objects is one of the most frequent methods for creating precious metal surfaces. In order to plate by yourself in a selective way on certain spots, the so-called swab plating has proven itself. The manual galvanic pen from Tifoo allows you to create precious metal layers in a well-directed and efficient way. The pen comes with a high quality graphite anode that serves as well as replacable top for the absorbent swab. Precision work (but no filigree plating of jewellery) as well as large surfaces can be plated with this pen. In order to chrome- and nickel-plate, it is advisable to purchase a nickel rod electrode

€49.90*
Polishing agent "Power Polish" (250 ml)
Description of the article: Tifoo Polishing agent "Power Polish" (250 ml) – the product features at a glance: easy polishing of various metals with Tifoo Power Polish Polish for post treatment after plating Removes black discolourations and makes the object gleam 250 mL highly effective polish Polish for most metals This top product from Tifoo allows you to polish numerous metals like iron, nickel, lead, tin, silver, gold, copper, zinc, aluminium, chrome, bronze, brass, palladium, rhodium or platinum. In order to achieve a perfect finish after the electroplating process, we also recommend our Tifoo Power Polish for making the workpiece shine. It allows also to get easily rid of blackening or other discolouration. The application is very simple: apply the polish with a soft and dry piece of cloth on the metal in question, polish it and let the polish work in for a moment. After removing eventual residues with alcohol, the shining result can already be seen. A very good combination for gilding almost every metal: copper (acidic), nickel (or palladium or rhodium) and finally gold. We recommend nickel-plating before if youre treating copper, silver and non-ferrous heavy metal because after some days or week, the gold can mix with the shades (diffusion). All of the necessary electrolytes can be purchased in our online shop. We also offer a currentless alternative to nickel plating. Our varied range of galvanic products and electrolyte solutions supports you in hobby and job. Please read also our instruction manuals.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.2 Liter (€74.50* / 1 Liter)

€14.90*
Zinc sheet anode
Dimensions: 8 x 5 cm
Description of the article: Tifoo Zinc sheet anode – the product features at a glance: available sizes: 80 x 50 x 0.6 mm / 150 x 100 x 0.6 mm / 200 x 170 x 0.6 mm ideal for galvanizing perfectly compatible with the small Tifoo "Galvanic tank" also available: graphite, copper and nickel anodes The zinc anode is perfectly suited for working with zinc electrolytes. It serves as a sacrificial anode, i.e. the zinc dissolves and regenerates the electrolyte. This guarantees a constantly good deposition. On request, we will offer further electrode sheets. Don't hesitate in contacting us!

€4.50*
Conductive silver varnish spray (150 ml)
Description of the article: Tifoo Conductive silver varnish spray (150 ml) – the product features at a glance: highly conductive easy application 16 g of silver Pretreatment for tank plating and pen plating The Tifoo Conductive silver varnish allows you to make surfaces like plastic, wood and many other things conductive and to electroplate them afterwards. Once applied, the conductive varnish can be covered with pen or immersion plating. In order to have gleaming results, the object treated with silver conductive varnish should be coated by using the acidic copper electrolyte - you can afterwards polish the object until it gleams and continue with gilding or silver-plating. Please read our instruction manual attentively before using the conductive varnish spray. Scope of delivery: 150 ml of silver conductive varnishShipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Content: 0.15 Liter (€332.67* / 1 Liter)

€49.90*
Alligator clips (4 pieces)
Description of the article: The alligator clips are required for the attachment of all kinds of workpieces particularly for immersion plating. Available as a package of 4 pieces.

€6.90*
Copper rod anode (Ø 8 mm)
Description of the article: Tifoo Copper rod anode (Ø 8 mm) – the product features at a glance: copper rod anode of 99% copper length 10 cm, Ø 8 mm suitable for Tifoo pen / brush plating (GalvanoBrush) The copper rod anode (diameter: 8 mm, length: 10 cm) is ideally compatible with our Tifoo brush plating system "GalvanoBrush". You can easily replace the anode in the pen, when it is e.g. worn out. Copper anodes are ideal for copper electrolyte, as they reduce the consumption and improve the electrolyte's deposition. We recommend to use the copper anode in combination with the Tifoo Bright copper electrolyte.

€5.90*
Exchangeable felt points (10 pieces)
Description of the article: Tifoo Exchangeable felt points (10 pieces) – the product features at a glance: 10 exchangeable felt points for Tifoo pen plating system "GalvanoPen" compatible with Tifoo GalvanoPens "Graphite" and "Nickel" 28 mm length, 5 mm diameter 10 replacement points for the Tifoo GalvanoPen. The robust felt points made of resistant fibre material are compatible with all Tifoo electrolytes. The GalvanoPen allows you to easily plate objects with copper, silver, gold or rhodium. We recommend to use a separate point for each electrolyte.

€11.90*
Nickel sheet anode
Dimensions: 8 x 5 cm
Description of the article: Tifoo Nickel sheet anode – the product features at a glance: available sizes: 80 x 50 x 0.6 mm / 150 x 100 x 0.6 mm / 200 x 170 x 0.6 mm ideal for galvanic nickel-plating perfectly compatible with the small Tifoo "Galvanic tank" also available: graphite, copper and zinc anodes The nickel sheet electrodes are ideally suited for electroplating purposes. They act as so called sacrificial anodes during the electroplating process and the nickel sheet dissolves and hence regenerates the nickel content in the solution. In this manner a constant and permanent deposition of nickel is assured. On request, we'll offer further sheet electrodes. Don't hesitate in contacting us.

€6.50*
Alkaline copper plating solution
Quantity: 1000 mL
Description of the article: Tifoo Alkaline copper plating solution – the product features at a glance: 1000 ml of alkaline copper plating solution ideal for tank- and pen plating 50 g of copper / litre for iron and tin objects Easy to use and free from cyanide This plating solution is ideally suited to plate on materials which are sensitive to acids, like iron, steel or zinc. It allows to copper-plate e.g. material that would be damaged by the acidic copper electrolyte - like for example steel or other iron material. A copper layer protects the iron or steel workpieces from rust and gives them a visually appealing look thanks to the red gleam of this noble metal. Thanks to it's good solderability, galvanic copper-plating is perfect for creating circuit boards and platines. Just use the copper electrolyte together with a copper sheet as anode and you yourself can already copper-plate a component with a bright copper layer. You can find detailed instructions for the product in our online shop. For copper-plating material that is not susceptible to acids, please use the Tifoo Bright copper electrolyte. If you have any questions, we'll be happily at your disposal.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

€29.90*
Galvanic microfibre swabs (4 pieces)
Description of the article: Tifoo Galvanic microfibre swabs (4 pieces) – the product features at a glance: compatible with Tifoo pen plating system "GalvanoBrush" 4 swabs made of highly absorbant micro fibre material maximum speed for electroplating resistant to chemicals and durable top quality - sewed 4 Exchangeable swabs in top quality. Perfectly suited for all of the galvanic electrolytes from Tifoo. Especially suited for chrome electrolyte. The swabs are made of robust and absorbant microfibre and are completely sewed, so that a long working life is guaranteed. The swabs have an opening at one side so that they can easily be put on our electroplating rod anodes. Microfibre is resistant to chemicals and for that very durable.

€13.90*