Copper lacquer for metallising non-conductive surfaces - tin can (200 ml)
€49.90
Available, delivery time: 1-3 Days
Product information "Copper lacquer for metallising non-conductive surfaces - tin can (200 ml)"
Description of the article:
Tifoo Copper conductive paint (200 ml) – the product features at a glance:
- 200 ml of conductive copper paint for electroplating
- for airbrush and brush
- makes non-conductive material conductive
- plating plants and natural objects
- easy and filigree application
This galvanic conductive paint on copper base from Tifoo allows you to plate works of art and gifts made of glass, pottery, plastic and a lot of other material with a bright layer of metal in a short time.
Just apply a thin layer of the conductive paint with a brush on the cleaned surface. The copper conductive paste dries until rub-proff in 10 to 15 minutes and therefore allows a quick treatment of the workpieces. The complete drying for perfect resistance on stressed surfaces takes about 12 to 36 hours at room temperature. The varnish can be diluted with butyl acetate. In the next step, the object is connected to a wire and copper-plated in the acidic copper electrolyte from Tifoo. A resistant copper layer will then be deposited. The last step can be used for nickel-plating, silver-plating or even gilding!
Thanks to its low price and the high electrical and thermical conductiveness, the conductive copper varnish is the perfect alternative to the conductive silver varnish. Please keep in mind that the first step has to consist in copper-plating in the acidic copper electrolyte because the conductive varnish won't be activated before. After copper-plating, the metal layer will be wear-resistant.
Suitable material: synthetic material, glass, pottery, plants, wood and a lot of other non-conductive material
Drying time: 5-15 minutes (rub-proof), 1-3 days (complete for maximal requirements)
20 mL are enough for a surface of up to one square metre - very efficient!
Shipping notes:
As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.
Application information:
Information on product safety:
The information on the product label must always be followed.
Manufacturer / Responsible person for the EU:
MARAWE GmbH & Co. KGAn d. Irler Höhe 3B
93055 Regensburg, Deutschland
+49 941 29020439
info@marawe.de
Login
Reviews are not verified as to the authenticity of purchases. Reviews may be from consumers who have not purchased or used the products.
Similar articles
Copper lacquer for metallising non-conductive surfaces – the perfect starting layer for copper plating.
Content: 0.4 Liter (€124.75 / 1 Liter)
Acidic bright copper electrolyte for high-gloss copper plating in baths or pens – cyanide-free.
Content: 0.25 Liter (€59.60 / 1 Liter)
With 16 g of silver: makes plastic and other materials conductive – ideal for bath and pen electroplating.
Content: 0.15 Liter (€399.33 / 1 Liter)
Alkaline high-performance degreaser for clean metal surfaces – ideal pre-treatment for electroplating and anodising.